Terobosan baru teknologi penangkapan karbon skala industri

Dalam terbitan 1 Juli 2019, majalah Chemical Engineering melaporkan peluncuran proyek terobosan baru teknologi penangkapan karbon skala industri. Proyek ini merupakan proyek konsorsium 11 perusahaan Eropa termasuk ArcelorMittal, Axens, IFP Energies nouvelles (IFPEN) dan Total. Proyek yang diluncurkan satu bulan lalu ini bertujuan untuk mendemonstrasikan proses inovatif yang disebut DMX untuk menangkap CO2 dari kegiatan industri. Proyek ini adalah bagian dari penelitian komprehensif yang didedikasikan untuk pengembangan European Dunkirk North Sea Capture and Storage Cluster di masa depan.

Proyek 3D (Demonstrasi DMX di Dunkirk) adalah bagian dari Horizon 2020, program penelitian dan inovasi Uni Eropa, dengan total dana EUR 19,3 juta untuk jangka waktu 4 tahun. Pabrik skala pilot akan dibangun mulai tahun 2020 di pabrik ArcelorMittal steelworks di Dunkirk dan akan mampu menangkap 0,5 m.t./jam CO2 dari gas pembuatan baja sebelum 2021. Pabrik pilot akan menggunakan proses DMX yang sudah dipatenkan, tangkai dari penelitian IFPEN dan akan dilisensi oleh Axens.

Proses DMX (flowsheet) didasarkan pada pelarut amina khusus yang memisah menjadi dua fasa cair untuk beban CO2 atau kondisi suhu tertentu, salah satunya memiliki beban CO2 tinggi. Dengan memisahkan kedua fasa di dekanter memungkinkan untuk mengurangi massa pelarut yang harus diregenerasi. Ini mengurangi energi untuk menangkap hampir 35% dibandingkan proses acuan monoetilamina (MEA) konvensional. Selain itu, menggunakan panas yang dihasilkan oleh pabrik akan memangkas biaya penangkapan separonya, menjadi kurang dari EUR 30/m.t. CO2. (hs)

Graduation Ceremony (19/09/2015)

wisudawan sep 2015elkim1415

The graduation ceremony for our students graduated this period was held on Saturday, 19 September 2015 in Graha Sepuluh Nopember. Congratulations. They are

Doctoral

  • Nanik Astuti Rahman

Master

  • Supriyono
  • Memik Dian Pusfitasari
  • Dini Aulia Rachmawati
  • Azzah Dyah Pramata (Joint Degree with Kumamoto Univ.)

Bachelor

  • Agquilline Novianty Kantanegara
  • Victoria Amanda Putri Chandra
  • Emelia Tri Ambarwati
  • Jannatun Cintya Dewi
  • Moh. Chafid Maruf
  • Reka Erdanto
  • Mutia Noviyanti
  • Heni Silvana
  • Arwinda Rizkidiba
  • Cintya Fitriani
  • Bhisma Anugerah Agung Prakasa
  • Sam Matahari

Japan Powder Technology Forum within NNS 2013 and launching of Indonesian Powder Association

Image

(Berita lain: disini)

Within “the 5th Nanoscience and Nanotechnology Symposium (NNS 2013)” held by Study Center of Materials and Nanotechnology LPPM ITS on 23-25 October 2013 in Meritus hotel, Surabaya, the Department of Chemical Engineering ITS, cooperated with the Society of Powder Technology Japan, held “Japan Powder Technology Forum (JPTF 2013)”. Both NNS 2013 and JPTF 2013 were organized by our laboratory. The Forum was aimed to introduce the technological development related to powder/particle developed by Japanese companies to Indonesian companies/society. The program started at 13.00 p.m. and officially opened by Prof. T. Matsuyama, head of Kanto Section of the Society Powder Technology Japan. The forum was chaired by Prof. Wuled Lenggoro of Tokyo University of Agriculture and Technology.

The first speaker for the first session was General Manager and CEO of Ohkawara Kakohki Co. Ltd., M. Osuga dan M. Ohkawara, respectively. They introduced spray dryer technology with twin jet nozzle. This technology has been applied at many industrial segments including food, pharmaceutical, organic chemistry, inorganic chemistry, industrial waste, advanced ceramics, etc. The presentation was continued by speech by CEO of Makino MFG Co. Ltd., T. Makino, who discussed about pulverizer to produce rice flour. They developed a machine, that although the raw materials have different characteristics but have the same quality of products. The first session was ended by the talk by S. Nagare, PhD. from Nara Machinery Co. Ltd. They introduced their developed technology to modify particle surface and composite materials by hybridization system.

The second session was opened by a presentation about the application of industrial microwave on bulk solid handling processing by the president of Matsushima Machinery Laboratory Co. Ltd. One application of this technology is on the measurement of solid level in silo. The next presenter was president director of Nishimura Machine Works Co. Ltd. who talked about weighing and filling machine of powder. Then, president of Tokuju Co. presented about milling and classifying process. This session was closed with presentation by Dr. N. Aya of National Institute of Advanced Industrial Science and Technology who discussed about fine bubble technology and international standardization.

The Forum was attended by representatives from 14 Indonesian companies, namely: PT. Petrokimia Gresik, PT. Pupuk Kalimantan Timur, PT. Molindo Raya, PT. Grafindo Nusantara, PT. Trans Sulawesi Tenggara, PT. Trans Sulawesi Sejahtera, PT. Trans Jawa Sulawesi, PT. Ultimate Carbometal Nusantara Dua, PT. Carbonindo Nusantara Jaya, PT. Gunung Sabak, PT. Wali Mining, PT. Latambaga Raya, PT. Lasolo Karya Sejahtera dan PT. Mekongga Sejahtera. Two companies run business on production of fertilizer and the others mostly on mining and minerals production. The participants were very enthusiast with the discussion demonstrated by many questions arised during discussion sessions.

The forum was closed by the launching of Indonesian Powder Association to build better networking for developing powder technology. The association was established to answer the concern about  the neglect of development of powder technology resulting natural resources and minerals spreading around the area of Indonesia exported in the form of raw materials without added value. To overcome the problem, Indonesian Powder Association was established to build networking and cooperation among industries, universities and research institution. It is expected that technology transfer from universities and research institution from fundamental and applied research will be implemented.  The Department of Chemical Engineering ITS took an active role on establishing this association where one of its academic staff, Prof. Heru Setyawan, is head of international collaboration and has had collaboration with PT. Trans Jawa Sulawesi for developing magnesia processing.

The organization of the Indonesian Powder Technology is in the following.

– Chairman: Husni Thamrin
– Vice Chair: Budi Santoso, Surya Widjaja
– Secretary: Rudy Achmad Ridwan, Dr. Camellia Panatarani, M.Si
– Finance: Sylvia, Gloria Rizki Adiarti Wakil
– Head of Division:
* Research and Development Division: Dr. I Made Joni, M.Sc.
* Corporate and Development: Anton Rianto, Hartono
* Laws and Legal: Aji Setiadi, SH
* Communication and Human Relation: Haddy Arief, RA. Vitadevi Wing Wiryawan
* Organization and membership: Deden Sukarna
* International Collaboration: Prof. Dr. Heru Setyawan
* International Relation: Prof. Dr. Wuled Lenggoro
– Inspectors: Suratto S., Yorrys R., Deddy A. Soemanegara, Prof. Dr. Ganjar Kurnia

There are 11 companies that have joined the Indonesian Powder Association as corporate members. The eleven companies are: PT. Grafindo Nusantara, PT. Trans Sulawesi Tenggara, PT Trans Sulawesi Sejahtera, PT Trans Jawa Sulawesi, PT. Ultimate Carbometal Nusantara Dua, PT Carbonindo Nusantara Jaya, PT Gunung Sabak, PT Wali Miniing, PT Latambaga Raya, PT Lasolo Karya Sejahtera and PT Mekongga Sejahtera. Most of the companies are on the mining and minerals business. We hope there will be more companies from various fields of business join this association in the near future to support and contribute to the development of Indonesia.